The CTP-NT32-Rotate is a 32-channel telemetry system for rotating applications with integrated signal conditioning for sensor signals, wireless digital transmission and analog reproduction.
In the encoder/transmitter unit the sensor signals are conditioned, filtered (anti-aliasing) and digitized (16 bit). Simultaneous sampling is provided for all channels. Finally the PCM encoded data is transmitted via radio frequencies to the receiver.
Various configurations of different sensor modules are available incl. signal conditioning for strain gages (STG), thermocouples type K (TH-K), ICP sensors, potentiometer sensors (POT) and also voltage inputs. Mixed configuration available (2-CH-steps). All sensor modules are software programmable via RS232 cable or buetooth remote.
The stationary receiver provides 32 +/-10 V analog outputs via Sub-D male socket or ethernet output.
The analog signal bandwidth is 0 - 190 Hz (320 kbit) and up to 0-1500Hz (2500 kbit) for 32 channels. The measurement accuracy is < ±0.2 % (without sensor). The CTP-NT32-Rotate is specified for operational temperatures from -20 °C to +70 °C. The maximum distance between transmitter and receiving antenna is approx. 10 - 20 m (30 - 60 feet) – depending on the application! Mixed configuration available (2-CH-steps).
- Inputs for STG, TH-K, ICP or VOLT
- Simultaneous sampling
- 18 bit resolution
- Software programmable
- Signal bandwidth: 32 x 0 - 1500 Hz
- Battery power up to 4 h
- Radio telemetry transmission
- Output analog +/-10 V
- Digital data interface to PC (option)
- Waterproofed ENC housing (IP65)
|2500 kBit/s||1500 Hz (3906.25 Hz*)|
|1250 kBit/s||750 Hz (1953.125 Hz*)|
|625 kBit/s||375 Hz (976.56 Hz*)|
|312,5 kBit/s||190 Hz (488.28 Hz*)|