Skip to main content

CTP-NT8-Rotate is a programmable 8-channel telemetry system that is specifically designed to be mounted on rotating wheels, rims or rotors of helicopters. The following sensors can be connected: strain gauge sensors (STG) as a full-, half-and quarter-bridge, thermocouple type K to 1000°C, ICP sensors and voltage signals + /-5V or + /-10V. All sensor modules are software programmable

The measured signals of the rotating transmitter are transferred by radio transmission to a stationary receiver (decoder) inside the vehicle and available as 8 x +/10V analogue outputs via BNC sockets or as digital signal output by a PCM-LAN-IP interface. To avoid any signal interferences during transmission the decoder is equipped with an advanced diversity- or quad-rf-receiver. A simultaneously and synchronic data transmission of all channels is ensured under all conditions. The maximum distance between transmitter and receiving antenna is approx. 10-20 m (30-60 feet) - depending on the application.

By the use of advanced rf-transmission technologies the CTP-NT8-Rotate Telemetry enables an extreme high-speed signal transfer of up to 5Mbit/s. As a result of this, all channel can be transferred with an analogue bandwidth of up to 0..12kHz which is most important in measurements of dynamic torque and vibrations.

Product specifications

  • Inputs for STG, TH-K, IEPE, VOLT or LVDT
  • Simultaneous sampling
  • 18 bit resolution
  • Software programmable
  • Signal bandwidth: up to 12 kHz
  • Battery power up to 7h
  • Radio telemetry transmission
  • Output analog +/- 10 V
  • Digital data interface to PC (option)
  • Waterproofed ENC housing (IP65)

Cut-off frequency of anti-aliasing filter (-3 db) (* = sampling rate)

Bit-Rate 4-Channels 8-Channels
5000 kbit/s 24000 Hz (*62500) 12000 Hz (*31250)
2500 kbit/s 12000 Hz (*31250) 6000 Hz (*15625)
1250 kbit/s 6000 Hz (*15625) 3000 Hz (*7812.5)
625 kbit/s 3000 Hz (*7812.5) 1500 Hz (*3906.25)
312,5 kbit/s 1500 Hz (*3906.25) 750 Hz (*1953.125)

Downloads for this product

User manual

Additional views

Worldwide distribution

Benefit from our sales partners all over the world and experience the quality of our KMT telemetry products.

All sales partners

Coming fairs

Experience KMT products live and in person at the fair stands of our strategic partner imc Test & Measurement GmbH.

All coming fairs

Start search
Find a sales partner
Open form